Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
#Screen 0 "ATIScreen" 0 0
#Screen 1 "Screen1" RightOf "Screen0"
#Option "Xinerama" "true"
#Option "Clone" "true"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
#InputDevice "USB Mouse" "CorePointer"
#InputDevice "Touchpad" "SendCoreEvents"
#InputDevice "ALPS Touchpad" "SendCoreEvents"
#InputDevice "Appletouch" "SendCoreEvents"
#InputDevice "Stylus" "SendCoreEvents"
#InputDevice "Eraser" "SendCoreEvents"
#InputDevice "Cursor" "SendCoreEvents"
#InputDevice "Serial Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
# Xorg 7.0 font paths
FontPath "/usr/share/fonts/X11/100dpi:unscaled"
FontPath "/usr/share/fonts/X11/misc:unscaled"
# Other font paths
FontPath "/usr/share/fonts/truetype/arphic"
FontPath "/usr/share/fonts/truetype/freefont"
FontPath "/usr/share/fonts/truetype/kochi"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "dbe"
#Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "type1"
Load "v4l"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XKbOptions" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "70"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "HorizScrollDelta" "0"
Option "MinSpeed" "0.09"
Option "MaxSpeed" "0.18"
Option "AccelFactor" "0.0015"
Option "SHMConfig" "on"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "ALPS Touchpad"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "event"
Option "LeftEdge" "130"
Option "RightEdge" "840"
Option "TopEdge" "130"
Option "BottomEdge" "640"
Option "FingerLow" "7"
Option "FingerHigh" "8"
Option "MaxTapTime" "180"
Option "MaxTapMove" "110"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "0"
Option "MinSpeed" "0.25"
Option "MaxSpeed" "0.50"
Option "AccelFactor" "0.030"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
Option "SHMConfig" "on"
EndSection
Section "InputDevice"
Identifier "Appletouch"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "100"
Option "RightEdge" "1120"
Option "TopEdge" "50"
Option "BottomEdge" "310"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapMove" "220"
Option "TapButton1" "1"
Option "TapButton2" "3"
Option "TapButton3" "2"
Option "MinSpeed" "0.79"
Option "MaxSpeed" "0.88"
Option "AccelFactor" "0.0015"
Option "SHMConfig" "on"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "70"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "Stylus"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "stylus"
Option "Device" "/dev/input/wacom"
Endsection
# Settings for wacom eraser
Section "InputDevice"
Identifier "Eraser"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "eraser"
Option "Device" "/dev/input/wacom"
Endsection
# Settings for wacom cursor (mouse)
Section "InputDevice"
Identifier "Cursor"
Driver "wacom"
Option "Mode" "Relative"
Option "Type" "cursor"
Option "Device" "/dev/input/wacom"
Endsection
# Studioworks 700s
#Section "Monitor"
# Identifier "Monitor0"
# VendorName "LG"
# ModelName "StudioWorks 700s"
# Option "DPMS" "true"
# HorizSync 30.0-70.0
# VertRefresh 75.0-160.0
# Modeline "1152x864@75" 111.72 1152 1184 1608 1640 864 880 891 908
Section "Monitor"
Identifier "monitor0"
VendorName "Samsung"
ModelName "1360x768"
HorizSync 31.5 - 100.0
VertRefresh 59.0 - 75.0
# Samsung 26"
ModeLine "1360x768_60.00" 84.72 1360 1424 1568 1776 768 769 772 795
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
BoardName "unknown"
Screen 0
#Option "UseDisplayDevice" "dfp"
#Option "MonitorLayout" "crt,crt"
#BusID "PCI:1:0:0"
#Option "sw_cursor" # needed for some ati cards
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Option "UseInternalAGPGART" "no"
# savage special options, use with care
#Option "NoUseBios"
#Option "BusType" "PCI"
Option "DmaMode" "None"
# nvidia special options, use with care
Option "CursorShadow" "1"
Option "CursorShadowAlpha" "63"
Option "CursorShadowYOffset" "2"
Option "CursorShadowXOffset" "4"
Option "FlatPanelProperties" "Scaling = native"
Option "NoLogo" "true"
Option "UseEDID" "true"
Option "AddARGBGLXVisuals" "true"
Option "RenderAccel" "true"
#Option "AllowGLXWithComposite" "true"
EndSection
#Section "Device"
# Identifier "Card1"
# Driver "nvidia"
# BoardName "unknown"
#Screen 1
#Option "MonitorLayout" "crt,crt"
#BusID "PCI:1:0:0"
#EndSection
# Samsung 26" TV
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Virtual 1360 768
EndSubsection
Subsection "Display"
Depth 15
Virtual 1360 768
EndSubsection
Subsection "Display"
Depth 16
Virtual 1360 768
EndSubsection
Subsection "Display"
Depth 24
Virtual 1360 768
EndSubsection
# LG Studioworks 700s
#Section "Screen"
# Identifier "Screen0"
# Device "Card0"
# Monitor "Monitor0"
# DefaultColorDepth 24
#
# SubSection "Display"
# Depth 8
# Modes "1152x864"
# EndSubSection
# SubSection "Display"
# Depth 15
# Modes "1152x864"
# EndSubSection
# SubSection "Display"
# Depth 16
# Modes "1152x864"
# EndSubSection
# SubSection "Display"
# Depth 24
# Modes "1152x864"
# EndSubSection
# SubSection "Display"
# Depth 32
# Modes "1152x864"
# EndSubSection
# Only the official NVIDIA driver supports twinview
# these setting are an example
Option "TwinView" "false"
Option "SecondMonitorVendorName" "unknown"
Option "SecondMonitorModelName" "unknown"
Option "SecondMonitorHorizSync" "30-75"
Option "SecondMonitorVertRefresh" "55-70"
#Option "MetaModes" "1152x864, 1152x864"
Option "TwinViewOrientation" "RightOf"
Option "ConnectedMonitor" "dfp,dfp"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
This is a copy of my xorg.conf (also usable as a XF86Config file). You may find it handy to reference. I pasted it on the MepisLovers.org forum to help out another Mepis user who wanted to use his Samsung TV with his Mepis computer, as I also have done.